Heavy Duty Pneumatic Crimp Tool AMT23B (M22520/23-01)
• 8 indent crimp configuration
• Designed with safety in mind
• Meets all MIL-DTL-22520/23 requirements
• No extra booster required for large contacts
• Interchangeable dies and locators
The AMT23B takes all the work out of crimping those large contacts. Using interchangeable dies and locators, this tool crimps contact sizes 8 through 0000. The steady, uniform crimp force, provided by the air logic function delay, crimps even the largest of these contacts without cracking them. Unlike similar tools, Astro’s AMT23B crimps its full range without using a booster adapter.
The AMT23B is designed with operator safety in mind. The air logic function delay allows adequate time to remove fingers from the crimp area before crimping begins.
This tool is easily portable and weighs less than 19 pounds. It operates on 80-120 P.S.I. and requires a regulated, filtered and lubricated air supply for optimal function. Astro offers the 11413 air regulator for this purpose. The tool comes with a 1⁄2 inch diameter air coupler for convenient quick disconnect.
NOTE: ASTRO WILL CUSTOM DESIGN DIES AND LOCATORS FOR YOUR SPECIAL REQUIREMENTS. WE ALSO OFFER A WIDE RANGE OF GAGES FOR USE WITH THIS TOOL. PLEASE CONSULT THE FACTORY FOR FURTHER DETAILS.
Changing dies and locators
 |
 |
 |
||
|
|
|
AMT23B (M22520/23-01) Die & Locator Selection Chart
M22520/23-01 INTERCHANGEABLE DIES AND LOCATORS |
||
MIL # |
DESCRIPTION |
ASTRO # |
| M22520/23-01 | Crimp Tool | AMT23B |
| M22520/23-02 | Die Assy. #8 | AMT23002DA |
| M22520/23-03 | Die Assy. #6 | AMT23003DA |
| M22520/23-04 | Die Assy. #4 | AMT23004DA |
| M22520/23-05 | Die Assy. #1/0 | AMT23005DA |
| M22520/23-06 | Die Assy. #2/0 | AMT23006DA |
| M22520/23-07 | Die Assy. #4/0 | AMT23007DA |
| M22520/23-09 | Locator #8 | AMT23009L |
| M22520/23-10 | Locator #6 | AMT23010L |
| M22520/23-11 | Locator #4 | AMT23011L |
| M22520/23-12 | Locator #4,4N,4G | AMT23012L |
| M22520/23-13 | Locator #1/0 | AMT23013L |
| M22520/23-14 | Locator #1/0,1/0N | AMT23014L |
| M22520/23-15 | Locator #2/0,2/0N | AMT23015L |
| M22520/23-16 | Locator #4/0,4/0N | AMT23016L |
DIE ASSEMBLY GAGING LIMITS |
|||
Part # |
Contact Size |
Die Gaging Limits |
|
GO |
NO GO |
||
| AMT23002DA | 8 | .130 | .136 |
| AMT23003DA | 6 | .171 | .178 |
| AMT23004DA | 4 | .195 | .202 |
| AMT23005DA | 0 | .325 | .332 |
| AMT23006DA | 00 | .351 | .358 |
| AMT23007DA | 0000 | .425 | .432 |
GAGES |
|
GAGE # |
DIE ASSEMBLY |
| AMTG2302 | AMT23002DA |
| AMTG2303 | AMT23003DA |
| AMTG2304 | AMT23004DA |
| AMTG2305 | AMT23005DA |
| AMTG2306 | AMT23006DA |
| AMTG2307 | AMT23007DA |
CONTACT LOCATORS |
|||
Part # |
Contact Size |
MS Contact # |
|
| AMT23009L | 8 | M39029/29-8-8 M39029/30-8-8 MS90453-8-8 MS90454-8-8 |
M30929/29-214 M39029/30-220 M39029/44-291 M39029/45-298 |
AMT23010L |
6 | MS90559-11 | M39029/48-317 |
| 6N | MS90559-12 | M39029/48-318 | |
| 6G | MS90559-14 | M39029/48-319 | |
| 6 | MS90560-7 | M39029/49-329 | |
| 6G | MS90560-8 | M39029/49-330 | |
| AMT23011L | 4 | M39029/29-4-4 M39029/30-4-4 MS90453-4-4 MS90454-4-4 |
M39029/29-215 M39029/30-221 M39029/44-292 M39029/45-299 |
| AMT23012L | 4 | MS90559-8 | M39029/48-320 |
| 4N | MS90559-9 | M39029/48-321 | |
| 4G | MS90559-13 | M39029/48-322 | |
| 4 | MS90560-5 | M39029/49-331 | |
| 4G | MS90560-9 | M39029/49-332 | |
| AMT23013L | 1/0 | M39029/29-0-0 M39029/30-0-0 MS90453-0-0 MS90454-0-0 |
M39029/29-216 M39029/30-222 M39029/44-293 M39029/45-300 |
| AMT23014L | 1/0 | MS90559-5 | M39029/48-323 |
| 1/0N | MS90559-6 | M39029/48-324 | |
| 1/0 | MS90560-3 | M39029/49-333 | |
AMT23015L |
2/0 | MS90559-3 | M39029/48-325 |
| 2/0N | MS90559-4 | M39029/48-326 | |
| 2/0 | MS90560-2 | M39029/49-334 | |
| AMT23016L | 4/0 | MS90559-1 | M39029/48-327 |
| 4/0N | MS90559-2 | M39029/48-328 | |
| 4/0 | MS90560-1 | M39029/49-335 | |