Carrier Fed Pneumatic Tools

• 614019-1 (Standard 8-indent)
• 11148 (4-indent)
• 620472 (mini top 8-indent)
• Meets all performance requirements of MIL-C-22520

These Astro cycle controlled carrier fed tools are rapid cycling, versatile tools designed for crimping mil-spec and proprietary contacts.

The 614019-1 produces an 8-indent crimp configuration on contact sizes 12-20 and wire sizes 12-28.

The 11148 accommodates the same size contacts and wire as of the 614019-1, but produces a 4-indent crimp.

The 620472 produces a 8-indent crimp configuration and is specially adapted for crimping contact sizes 22 and smaller.

The operator simply inserts a pre-stripped wire into the contact and actuates the tool by either pressing the trigger or by means of an optional foot pedal (p/n 620372), the tool then crimps the contact and cycles the next contact into crimping position. Crimp depth is determined by selecting the proper color coded, interchangeable, snap-in block.

A bench mount assembly, p/n 11151, is available which incorporates an arm for mounting a 15 inch reel with a capacity of 2000 contacts.

Molded polyethylene carriers, in a continuous belt, feed contact to the crimp station of the tool. The carriers act as locators for correct crimp location on the contact. The carriers are color coded for easy identification for both mil-spec and proprietary applications. Besides mil-spec applications listed, Astro has carriers to accommodate a large variety of proprietary contacts. Call the factory for information on your particular application.

These tools operate at 80-120 PSI and require a lubricated, regulated and filtered air supply. Astro offers an air pressure regulator, p/n 11413 for this purpose.

NOTE: Astro can load customer supplied contacts into the carriers and install them on reels upon customer request.